Industrial packaging · Palletizing
Blown stretch film for hand and machine wrapping
Blown stretch film for wrapping pallets, boxes and irregular loads by hand or machine. Blown, not cast: it holds the load with more force, resists punctures from sharp corners and tears less, so loads arrive as they left.
- Blown, not cast
- Hand and machine grades
- 15–25 µm
- Up to 100% recycled content
Blown, not cast
Higher holding force and puncture resistance than cast film of the same gauge, so fewer film breaks and fewer wraps on sharp or heavy loads.
Keeps out moisture
A tight wrap protects goods from dust and humidity.
Hand or machine
Rolls for hand wrapping or for stretch-wrapping machines.
Recycled content
Available with 90% or 100% post-consumer recycled PE, certified OK Recycled by TÜV Austria.
About this product
Blown film is cooled slowly in air and oriented in both directions, so it is tougher than cast film of the same thickness: higher puncture and tear resistance, higher holding force per wrap, and cling on both faces. Cast film is clearer and quieter; blown film is the one for heavy, sharp and irregular loads and long transport. Like all our PE films, it can be recycled where PE film collection exists.
Hand rolls are light enough to wrap by hand; machine rolls are made for turntable and rotary-arm wrappers with pre-stretch.
Blown versus cast stretch film
Our stretch film is blown on 5-layer co-extrusion lines, not cast. The difference shows on the pallet: more holding force per wrap, fewer film breaks on sharp loads, and cling on both faces.
| Blown stretch film (ours) | Cast stretch film | |
|---|---|---|
| Pre-stretch on the wrapper | Up to 350% on our machine grades | Typically 200–300% |
| How it is made | Extruded through a ring die into a bubble and cooled slowly in air, so the film is oriented in both directions | Extruded through a flat die onto a chill roll and cooled fast; oriented mainly in the machine direction |
| Holding force | Higher: the film keeps pulling the load together after it is wrapped | Lower at the same gauge; more wraps or a thicker film to hold the same load |
| Puncture and tear resistance | Higher: stands up to sharp corners, strapping and rough handling | Lower; a tear runs more easily once started |
| Clarity and noise | Slightly hazy; louder on unwind | Clear; quiet |
| Best for | Heavy, sharp and irregular loads, bagged goods, long road and sea transport, outdoor storage | Light, uniform cartons and display loads where clarity matters |
Ask for a sample roll and test it on your own wrapper against the cast film you use today.
Specifications
Typical properties
| Property | Unit | Typical value | Test method |
|---|---|---|---|
| Thickness | µm | 15–25 µm | ISO 4593 |
| Width | cm | up to 150 cm | — |
| Color | — | To order | — |
| Pre-stretch, machine grades | % | up to 350 % | — |
| Hand rolls: width / roll weight | mm / kg | 450–500 / 2–5 mm / kg | — |
| Machine rolls: width / roll weight | mm / kg | 500 / 15–17 mm / kg | — |
| Material | — | Blown LLDPE / mLLDPE, 5 layers | — |
| Thickness tolerance | % | ± 5 % | ISO 4593 |
| Thickness profile, across the web | % | ≤ 3 % | ESTL film tester |
| Roll outer diameter | mm | As required, up to 1,000 mm | — |
| Ultimate stretch | % | 150–500 % | ESTL film tester |
| Pre-stretch on the wrapper | % | 150–350 % | — |
| Unwind force | N | 40–50 N | ESTL film tester |
| Stretch force at 350 % | N | 170–190 N | ESTL film tester |
| Wind force at 350 % | N | 120–140 N | ESTL film tester |
| Peel-off force at 350 % | N | 30–50 N | ESTL film tester |
| Puncture at 350 % | N | 20–50 N | ESTL film tester |
| Tear propagation at 350 % | s | 7–15 s | ESTL film tester |
| Cling, film to film | N | 0.04–0.40 N | ESTL film tester |
Typical values, not a specification. The certificate of analysis for your order gives the measured values.
Blown stretch film datasheet
PDF, 2 pages · Typical values and test methods
Certificates
Applications
- Polymers
- Fertilizers
- Compounding additives
- Household products
- Beverages
- Food
- Detergents
- Glass
- Wood
Packing and shipping
- Core diameter
- Hand 50 mm (2″), machine 76 mm (3″)
- Roll size
- Hand rolls 2–5 kg, machine rolls 15–17 kg
- Per 40′ container
- About 20–23 t
- Lead time
- 4–5 weeks
- Minimum order
- On request
Related products
Quote for blown stretch film
Tell us how you wrap (by hand or machine), your pallet size and monthly volume. We reply with a quote within one business day.